Spring Clips are recommended for most HydraSleeve applications. They are used as hangers to attach the HydraSleeve to the tether. Also used to attach the hollow stainless steel top weights to the top of the 2" HydraSleeve and SuperSleeve varieties. An optional use would be to attach the top weights to the bottom of the HydraSleeve if needed.
Using the spring clip as a hanger will hold the top of the 2" HydraSleeve open for quicker fill time with the tether tied directly to the spring clip.
Reusable. Standard material = stainless steel. ~2" wide at the bottom x ~3" tall.
When used with the HS-2-1L (2-inch, 1-liter) HydraSleeve they will be altered to 2-1/2" wide.
The altered 2-inch spring clips will automatically be sent if you are ordering HS-2-1L along with your purchase. If it's not evident from your order which size you need, please tell us in the notes on your order. If not noted they will be shipped unaltered. You can alter them in the field by gently pulling the legs of the spring clip outward until the spring is stretched to approximately 2.5 inches wide.
|NOTES||DETAILS||ARTICLES OF INTEREST
RELATED TO THIS PRODUCT
Should be used with HS-2 and HS-2-1L - and need to be ordered separately.
We recommend using Spring Clips for most applications.
Don't use Spring Clips in wire wrap wells or where there are obstacles or rough edges in the well. Armored sleeves are typically used in such applications so we don't recommend Spring Clips for the armored bags.
| Spring Clip Instructions
Alternative Attachment without spring clips
Spring Clip Basics
Will come complimentary with the following top weights for 2-inch wells:
16-ounce top weight for HS-2
SuperSleeve Top Weight (and PVC Collars)
SkinnySleeve Top Weight (and PVC Collars)
TurboSleeve Top Weight
|Spring clips will come with all varieties of top weights.|