4-inch HydraSleeve made to hold greater than 2.5 liters of sample volume. The armored HydraSleeves have a protective outer sleeve that more than doubles the wall thickness.
An Armored HydraSleeve could be useful in steel wells, open boreholes, or anywhere you might expect that a HydraSleeve would come in contact with jagged edges or increased potential for abrasion.
2.9 inches O.D. by 37 inches long. Fill within a 7-foot column. Lay-flat width 4.614 inches.
Absolute maximum volume obtainable without spilling 2.9 liters
We would suggest moving up one level on the weight size chart to overcome any trapped air between the layers of material, and also to accommodate pulling down the additional buoyancy of the Armored HydraSleeves. We would suggest using the new 23-ounce compact weight with this armored HS-4-2L-ARMOR
LAYFLAT | FILLED | FILLED | FILL | |
WIDTH | LENGTH | DIAMETER | VOLUME | STROKE |
4.61" | 37" | 2.9" | ~2900ml | 37" |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
REQUIRED/RELATED ACCESSORIES |
DETAILS | ARTICLES OF INTEREST RELATED TO THIS PRODUCT |
General information on Armored HydraSleeves |
|
|
Minimum Recommended Weight 17-ounce bottom weight |
This is our heaviest bottom weight. Should heavier bottom weight be needed, please contact us for custom options. |
Weight Selection Chart |
Top Weights cannot be used with armored HydraSleeves |
If you encounter short saturated screens and need to use armored sleeves we recommend using an alterntive method of recovery - see link >>>> |
Alternative method of recovery - oscillating HydraSleeves during retrieval |
About our tether. | ||
Sand Weight Clips - for attaching the bottom of HydraSleeves to the tether. Typical for multiple sleeve deployment. |
About bottom (sand weight) clips | |
Spring Clips are not typically used with
|
See link >>> on alternative attachment. |
Alternative Attachment without spring clips |