The SpeedBag HydraSleeve elminates mixing in the well when it is deployed; therefore the equilibration time is eliminated. There is no need for well restabilization. The SpeedBag is designed to be deployed and retrieved immediately.
SPECIAL INSTRUCTIONS FOR THE SPEEDBAG: SPRING CLIPS FOR THE TOP OF THE BAG MUST BE USED. SPEEDBAGS REQUIRE ACTIVATION OF THE CHECK VALVE AND OSCILLATION DURING RECOVERY. TO POP OPEN THE CHECK VALVE PULL UP HARD 1-2 FEET ONCE ON THE TETHER; LET THE ASSEMBLY DROP BACK DOWN, REPEAT THIS PROCESS 4 TIMES, AND THEN QUICKLY RECOVER THE SPEEDBAG THROUGH THE WELL SCREEN.
No-purge device provides comparable, formation quality samples of ALL parameters from small-diameter (2" and larger) wells for both short and long-term monitoring.
Disposable. Fits in 2-inch Schedule 80 and larger wells. Standard material = virgin 4 mil PE.
Absolute maximum volume obtainable without spilling 500 mls. Please note you must have 6 feet of saturated screen to retrieve 500 mls of sample volume. For shorter saturated screens the sleeve can be shortened or alternative oscillating retrieval methods can be used (see article below).
LAYFLAT | FILLED |
FILLED |
FILL | |
WIDTH | LENGTH | DIAMETER | VOLUME | STROKE |
2.5" | 30" | 1.5" | ~500 ml | 30" AFTER INITIAL ACTIVATION |
REQUIRED/RELATED ACCESSORIES | ARTICLES OF INTEREST RELATED TO THIS PRODUCT | |
REQUIRED SPRING CLIP | New Updated SpeedBag HydraSleeve | |
MINIMUM WEIGHT: TAPERED 4 OZ. BOTTOM WEIGHT | How To Shorten HydraSleeves for Less Sample Volume | |
OPTIONAL WEIGHT 5 OZ. BOTTOM WEIGHT | Alternative Methods of HydraSleeve Retrieval - Oscillating |