(GSH170) 2-inch Composite HydraSleeve, 1-liter

CALL FOR INFORMATION. No-purge device for 2" Schedule 40 well and larger; used to collect and mix, in-situ, sample from 10' well screen. Holds ~1,000 mls.

2-inch Composite HydraSleeve

Sales price $53.00

Total: $53.00

Description

CALL FOR INFORMATION. Typically only used for specialized applications. No-purge device used to collect and mix, in-situ, sample from 10' well screen.

Disposable. Fits in 2" Schedule 40 and larger wells. Standard material = virgin 4 mil PE. Tensile strength 25-35 lb.

LAYFLAT		FILLED	FILLED	FILL
WIDTH	LENGTH	DIAMETER	VOLUME	STROKE
2.75"	36"	1.75"	~1000 ml	~96"

Fill stroke is the length of the sampler when used in 2-inch wells. It will be longer for larger diameter wells. Alternative method of recovery is recommended for use in larger wells - see link below.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

REQUIRED/RELATED ACCESSORIES	DETAILS	ARTICLES OF INTEREST RELATED TO THIS PRODUCT
2-inch Spring Clip - recommended for the top of the HydraSleeve	Don't use Spring Clips in 2-inch Sched 80 wells or when there are obstacles Spring Clips are altered slightly for this size HydraSleeve. They are made a little wider for the larger bag. If yours don't seem to fit, simply pull on the ends to make the spring clip wider.	Spring Clip Instructions Alternative Attachment without spring clips Spring Clip Basics
Minimum Recommended Weight 11-ounce bottom weight	If the well is more than 250 feet deep, or there are obstacles down hole, you may want to use heavier than 11 ounces. Also stringing multiple sleeves on one tether requires heavier weight.	Weight Selection Chart
Top Weights cannot be used with composite HydraSleeves		Alternative method of recovery - oscillating HydraSleeves during retrieval
Tether available in 500, 1000, and 2000-foot rolls. Marked sequentially in feet along the length of the line.		About our tether.
Sand Weight Clips - for attaching the bottom of HydraSleeves to the tether. Typical for multiple sleeve deployment.		About bottom (sand weight) clips
Spring Clips are not typically used with Armored HydraSleeves	Don't use Spring Clips in 1.5" wells or when there are obstacles. See link >>> on alternative attachment.	Alternative Attachment without spring clips