Back to: 1-inch HydraSleeve SkinnySleeve

(GSH405) HydraSleeve 1-inch SKY

1-inch HydraSleeve SKY, blue. SuperSleeve designed for 1-inch, schedule 40 wells. Holds ~300 mls. Use in conjunction with the 2-piece top weight or 2-piece collar. Sample volume is reduced to ~250mls when used with the top weight.

Sales price $35.00

Total: $35.00

Description

NEW 1-inch HydraSleeve SKY, blue. SuperSleeve designed for 1-inch, schedule 40 wells. Holds ~300 mls. Use in conjunction with the 2-piece collar with a bottom weight or with the 1-inch top weight with bottom weight. 1 inchlabel

Compresses to approximately 24 inches from the bottom of the well with the optional top weight.

Disposable. Standard material virgin poly, blue.

Must be used in conjunction with the special 2-piece top weight, or threaded PVC collar for 1-inch sleeves.

These are made for 1-inch schedule 40 wells.

You will get better results if you oscillate the 1-inch HydraSleeve in the screen before retrieving it to the surface. See the articles below for more information.

PLEASE CLICK FOR ASSEMBLY INSTRUCTIONS

SAMPLER LENGTH	WEIGHT TYPE	MINIMUM WELL DIAMETER	PULL TO FILL DISTANCE*	COMPRESSED BY TOP WEIGHT**
48"	8-ounce bottom weight and/or 1-inch top weight	1-inch Sch. 40	300 mls in 5-feet	~24"

* Distance the sampler needs to move upward to fill completely. The top of the sampler marks the beginning of the sample interval.
** Average distance from top of sampler to the bottom of the well when compressed by the top weight. Sleeve is lowered into the well fully extended below the weight, not rolled and inserted inside the weight.

REQUIRED/RELATED ACCESSORIES	DETAILS	ARTICLES OF INTEREST RELATED TO THIS PRODUCT
REQUIRED 1-inch PVC Collar	This style bag must have either a top collar and/or top weight. There is no stiffener, therefore it needs a piece of hardware at the top which serves as a connection point and it assists in this style bag filling faster. Use top weights to compress the bags into the bottom of the well for short water columns; and use collars when there is sufficient saturated screen and no compression is necessary.	Assembly Instructions for 1" HydraSleeve
Required bottom weights Minimum 8-ounce bottom weight	The 1-inch HydraSleeve assembly will require a bottom weight to go with the top weight or with the collar.	Weight Selection Chart
Optional: 1-inch Top Weight	You will need a top weight when the saturated screen is less than 9 feet. CAPACITY OF THE SLEEVE IS ~250MLS WHEN USING A TOP WEIGHT.	Top Weight for 1-inch HydraSleeve
Tether available in 2000-foot rolls. Marked sequentially in feet along the length of the line.	Any type of cable or line can be used. Please see this article "About Our Tether" which explains the advantages of using our tether.	About our tether.
	You will get better results if you oscillate the 1-inch HydraSleeve within the screen zone. See these articles for more information.	HydraSleeve Cycling if the Sleeve Doesn't Fit Methods of HydraSleeve Retrieval