We have updated our HydraSleeve Selection Sheet to include new information and to delete obsolete items.
To simplify conversion for our overseas markets and our distribution network we are also including a new Metric HydraSleeve Selection guide.
Metric HydraSleeve Selection Guide |
|||||||
| Description |
Minimum Well/Bore Diameter(mm) |
Sample Volume (mls) |
Sleeve Length (mm) |
Minimum Bottom Weight (grams) |
Minimum Top Weight with 140 g bottom weight (grams) |
Pull to Fill Distance* (meters) |
Compressed by Top Weight** (cm) |
|
Standard HydraSleeve (with reinforcement strip at top) |
|||||||
|---|---|---|---|---|---|---|---|
| 50mm Well/Bore | |||||||
| HS-2 HydraSleeve (600 mls) | 40 | 600 | 760 | 140 | 448 | 0.90 | ~25 |
| HS-2-1L HydraSleeve (1000 mls) | 50 | 1000 | 970 | 224 | n/a | 0.97 | n/a |
|
SpeedBag(500 mls) no equilibration time |
50 | 500 | 760 | 126 | n/a | 0.90 | n/a |
| 100mm Well/Bore | |||||||
| HS-4-2L HydraSleeve (3000 mls) | 80 | 3000 | 970 | 448 | 672 | 1.00 | ~31 |
|
SkinnySleeve 50mm Well/Bore (with reusable threaded top piece) |
|||||||
| HDSS-1.0L (1000 mls) LDPE or PFCHDSS-1L HDPE for PFA'S |
45 |
1000 | 970 | 224 | 900 | 0.90 | ~31 |
| HDSS-1.5L (1500 mls) | 45 | 1500 | 1320 | 224 | 900 | 1.50 | ~46 |
| HDSS-2.0L (2000 mls) LDPE or PFCHDSS-2L HDPE for PFA'S |
45 | 2000 | 1525 | 224 | 900 | 2.00 | ~61 |
| SkinnySleeve 27mm Well/Bore (with reuseable threaded top piece) | |||||||
| HS-1-SKY (300 mls) | 27 | 300 | 1220 | 224 | 380 | 1.50 | ~61 |
*Distance the sampler needs to move upward to fill completely. The top of the sampler marks the beginning of the sample interval.
**Average distance from the top of sampler to the bottom of the well when cmpressed by the top weight. Sleeve is lowered into the well fully extended below the weight, not rolled and inserted inside the weight.