THE HYDRACLAMP

These 5-1/2 inch water-tight clamps could be just the tool you need for decanting multiple samples from one recovered HydraSleeve.  The clamp can be used to seal the top of the HydraSleeve when you need to change vials.  When the clamp is in place you can even lay the HydraSleeve on it's side without spilling and without risking the integrity of your sample.

Each HydraClamp consists of two pieces.  A clamp and a sealing rod.  The HydraSleeve is placed between the two so that the sleeve will be pulled into the concave section of the clamp.  The rod is snapped into the clamp, forcing the HydraSleeve inside the clamp and forming a water-tight seal. 

This can make decanting the sample easier by clamping the sleeve shut between containers, or sealing the sampler for later use after a sample for VOC's has been decanted.  For just $3.00 each, your sampling event can be made even simpler with these NEW HydraClamps.